Inverter Modular Chillers MUENR-H7 Series
Super DC Inverter modular chillers are available in two versions, with and without a hydraulic unit.
Twin Rotary DC Inverter Compressor
Thanks to the Twin Rotary DC Inverter compressor, power consumption is reduced by 25%.
DC Fan Motor
The fan speed is adjusted according to the refrigerant pressure and the required load, thus reducing power consumption by 30%.
Low Temperature Operation
Thanks to the fan condensation control, the units can operate in both cooling and heating down to -15°C ambient temperature.
Modular System
Modular design allows up to 16 units to operate together, forming a unit of up to 880kW (in cooling).
Easy Connection
Easy connection between the master unit and the slave units. All units can be connected via a wired remote control (included with each unit), using a shielded three-pole cable.
Rotation Function
In a modular system, the rotation function allows all slave units to operate for the same amount of hours.
Backup Function
In a modular system, if one of the slave modules fails, the other modules continue to operate normally.
High Efficiency Plate Heat Exchanger
The plate heat exchanger uses multiple metal plates to achieve high efficiency in the transfer of heat between refrigerant and water.
Multiple Silent Modes
Several silent modes allow the reduction of the sound level during the day and / or night.
Hydraulic Kit Included (K Version)
The modules of the MUENR-H7T(K) version incorporate a re-circulation pump and an expansion vessel.
Flow Switch Included
All modules (with or without hydraulic kit) incorporate a flow switch.
Remote Signals
Potential-free ON/OFF, mode selection and alarm signals available on the PCB of each unit.
